Degreasing trays Products

HBM Hollow Cleaning Brush for Degreaser Tray, Bristles 7 cm, Length 27,5 mm.

Total length 275 mm. |

HBM High Pressure Parts Cleaner with Thermostat, Tank 185 l, 40 kg, 60 x 77 x 133 cm.

With the HBM High-Pressure Parts Washer With Thermostat, you can clean car and motorcycle parts thoroughly and efficiently. Thanks to the high-pressure rinsing with water and cleaning agent, you can easily reach even the hardest-to-access areas, such as deep bolt holes and other difficult-to-reach parts. The integrated thermostat heats the water to 50 degrees Celsius, allowing stubborn grease to soak loose even better. After cleaning, you switch off the hot water supply, so that only high-pressure air comes out of the cleaning gun to blow parts dry immediately. Main benefits Cleans parts under high pressure from 5 to 8 bar Hot water up to 50 degrees Celsius for loosening grease and dirt Also suitable for hard-to-reach areas and deep bolt holes After cleaning, only high-pressure air for immediate drying Large lockable lid protects against splashing water Product features Brand: HBM Tank capacity: 185 liters Maximum load: 40 kg Dimensions: 60 x 77 x 133 cm (w x l x h) EAN code: 7435125612631 A practical and powerful parts washer for anyone who wants to clean car and motorcycle parts carefully, quickly, and thoroughly.

HBM Loose Pump for Degreaser Trays 230V 1,9 l/min, pump height 1,8 m.

Voltage 230 Volt. |Power 26 Watt. |Pump capacity 1,9 Liter per minuut. |Maximum pump height 1,8 Meter. |

Eurol Cold Degreaser HF Plus 20 liter, degreaser, flash point 61 °C.

(1)

The Eurol Cold Degreaser HF Plus 20 Liter is a highly concentrated cold degreaser for effectively removing preservatives, oil, and dirt. This professional cleaning agent is suitable for cleaning parts of cars, motorcycles, and machines, but can also be used for floors. Thanks to its pleasant scent and suitability for use in both industrial and non-industrial environments, it is a versatile choice for a wide range of cleaning tasks. After use, no residue remains on the treated surface. Key benefits Highly concentrated cold degreaser for thorough cleaning Suitable for car parts, motorcycles, machines, and floors Leaves no residue on the treated surface Pleasant scent and applicable in different environments Supplied in a practical 20 liter jerry can with handle Product features Brand: Eurol Contents: 20 liters Flash point: 61 °C With the Eurol Cold Degreaser HF Plus 20 Liter, you choose a professional degreaser with clear usage information on the packaging and EAN code 8712569029980.

HBM 15 Liter Degreaser Tray with Pump, 1,9 l/min, 46 x 43 x 22,5 cm.

Contents of the bath 15 Liter. |Maximum fluid content 5 Liter. |Pump capacity 1,9 Liter per minuut. |

Eurol Cold Degreaser HF Plus 5 Liter - Degreaser, Flash Point 61°C.

(1)

The Eurol Cold Degreaser HF Plus 5 liter is a powerful degreaser for quickly and effectively cleaning a wide range of surfaces and parts. Thanks to its formulation with strong emulsifiers and hydrocarbon solvents, this product is suitable for de-preserving new cars, cleaning engine parts, filters, machines, engine rooms, tanks, lift bridges, floors and walls. The degreaser has a pleasant scent, is economical in use, and leaves no greasy film behind after rinsing with water. Main benefits Suitable for cleaning and degreasing various parts, machines and surfaces Leaves no greasy film behind after rinsing with water Economical in use thanks to its powerful action Pleasant scent and short contact time without affecting plastics and rubbers pH-neutral and therefore suitable for all surfaces Product features Brand: Eurol Contents: 5 liters Flash point: 61 °C EAN code: 8712569029959 Eurol Cold Degreaser HF Plus is biodegradable and has a relatively low evaporation rate. Due to its flash point of higher than 61 °C, the product is not classified under ADR, which can offer advantages in storage. For best results, the product should be used neat, and cleaned parts can be rinsed with water.

Eurol Power Cleaner Bio 2000 Cold Degreaser 5 Liter

The Eurol 5 Liter Cold Degreaser Power Cleaner Bio 2000 is a highly concentrated degreaser for the effective removal of stubborn dirt, grease, and deposits. This powerful cleaner is suitable for professional and versatile use on, among other things, metal, paint, and plastic. In addition, the cold degreaser can be used for removing algae deposits and cleaning trucks and passenger cars. Thanks to the practical 5-liter packaging and sturdy pouring bottle, the product is also easy to use in hard-to-reach places, such as engines, engine compartments, and bicycle parts. Main benefits Powerful degreaser for stubborn dirt, grease, and deposits Suitable for metal, paint, and plastic Can be used for engines, engine compartments, bicycle parts, and vehicles Product features Brand: Eurol Contents: 5 liters EAN: 8712569004819 The Eurol Power Cleaner Bio 2000 cold degreaser can be diluted with warm or cold water as desired. Depending on the contamination, a ratio of 1:400 to 1:10 can be used, allowing you to use the cleaner flexibly for a wide range of cleaning tasks.

HBM 176 Liter Degreasing Tray with Pump, 176 l Bath, 40 l Tank, 1.9 l/min, 91 kg, 115 x 56 x 90 cm.

Dimensions 115 x 56 x 90 cm. |Dimensions of the bath 113,5 x 54,5 x 32 cm. |Contents of the bath 176 Liter. |Maximum fluid content 40 Liter. |Pump capacity 1,9 Liter per minuut. |

HBM 90 Liter Mobile Degreasing Tray with Pump, 1.9 l/min, 35 kg.

Overall dimensions 105 x 54 x 92,5 cm. |Dimensions of the bath 71 x 48 x 20 cm. |Contents of the bath 90 Liter. |Maximum fluid content 40 Liter. |Pump capacity 1,9 Liter per minuut. |

HBM 90 Liter Degreaser Tray with Pump, 1,9 l/min, 78 x 54 x 88 cm.

Overall dimensions 78 x 54 x 88 cm. |Dimensions of the bath 71 x 48 x 26 cm. |Contents of the bath 90 Liter. |Maximum fluid content 40 Liter. |Pump capacity 1,9 Liter per minuut. |

HBM XH-MC Degreasing Tank with Pump and Lighting, 15 l, 1.9 l/min, 24 kg.

(1)

Overall dimensions collapsed 56 x 26 x 630 cm. |Maximum fluid content 15 Liter. |Pump capacity 1,9 Liter per minuut. |

Parts cleaner 75L MW Tools

The MW Tools Parts Cleaner 75L is the ideal solution for professional cleaning and degreasing of parts in your workshop. Specially designed for use with water-based degreasers, this powerful device combines efficiency with safety and ease of use. Spacious foot-mounted model: The robust tank with a capacity of no less than 75 litres offers plenty of work space for cleaning various parts. Circulation system: The cleaning fluid circulates continuously within the device, efficiently removing grease and dirt. Emptying the fluid is easy thanks to the convenient drain plug. Safety first: Equipped with a fuse to prevent ignition of the fluid during cleaning. You can always work with peace of mind. This product comes with everything you need for immediate use: Sturdy reservoir for the cleaning fluid Built-in powerful liquid pump Flexible metal hose for maximum mobility Choose the Parts Cleaner 75L MW Tools and experience worry-free cleaning with maximum efficiency and safety in your workshop!

Parts Cleaner 19L MW Tools

Discover the power of a thoroughly clean workshop with the MW Tools Parts Cleaner 19L! This compact tabletop model is specially designed for efficient and safe parts cleaning, ensuring optimal performance and durability at all times. Ideal for both professional workshops and DIY enthusiasts. Practical table model: Takes up little space and is immediately ready for use on any workbench. Generous 19-litre capacity: Suitable for cleaning various parts and tools. Handy metal flexible hose: For precise application and easy access to hard-to-reach places. Integrated reservoir and built-in pump: The degreaser circulates continuously in the cleaner, for effective removal of grease and dirt. Safety first: Equipped with a thermal protection that eliminates the risk of ignition. Easy to empty: Thanks to the convenient drain plug, cleaning and refreshing the reservoir is a breeze. With the MW Tools Parts Cleaner 19L, you're choosing reliability, ease of use, and maximum safety. Perfect for any cleaning job in the garage or workshop!

Mobile welding fume and oil mist extraction 2000M³/h 1.3KW 230V MW Tools

Discover the ultimate solution for a clean, safe, and efficient work environment with the MW Tools 2000m³/h 1.3KW 230V Mobile Welding Fume and Oil Mist Extractor . This powerful mobile filtration system is specifically designed to effectively remove welding fumes, harmful vapors, and oil mist, allowing you and your employees to work in a fresh and healthy atmosphere. Its compact design and flexible options make this filter unit perfect for any workplace where mobility and top performance are required. Dual filter function: This filter unit efficiently filters fumes from all welding processes, including MIG, TIG, spot welding, laser welding, and robotic welding. It also effortlessly removes oil vapors and mist from various machining operations such as grinding, turning, milling, and CNC machining. High filtration degree: With a 4-stage filtration system – including fireproof stainless steel filter, HEPA filter (0.5µm), carbon filter for odor control and an oil mist filter – even the finest dust and harmful aerosols are removed with an efficiency of up to 99%. Advanced filter cleaning: The filters are automatically cleaned with a powerful compressed air pulse. A push button on the control panel allows you to easily start the cleaning process, and the removable 20-liter steel dust container makes maintenance easy. Compact & mobile: With a footprint of just 55x77 cm and four swivel castors (with brakes), this unit is exceptionally space-saving and can be used anywhere. Rotating extraction arm: A 3-metre long, 360° freely rotatable arm with a heat-resistant hose and a robust plastic extraction nozzle provides ultimate flexibility in your workspace. Easy to use: The extraction speed is infinitely adjustable thanks to the variable servo motor (1.3 kW, 1300-5600 rpm), which optimises noise and power consumption. Useful features: Large filter surface of 15 m² for maximum air purification Overload protection for maximum safety Stainless steel filter easy to clean with water Recirculation of purified air directly back into the workshop Suitable for non-ATEX environments 5 meter power cord with plug included Choose a clean and safe work environment with the MW Tools mobile welding fume and oil mist extraction system. Designed for maximum performance, flexibility, and ease of use – essential for any professional workshop!